Compressor Oil is made from high quality mineral base oil and imported additives to gives thermal and oxidative stability to resist carbon deposit formation on exhaust value & channel, pistons & packings. Compressor Oil has been developed to meet the changes in air compressor designs, which have resulted in increased capacity and efficiency. Compressor Oil is also recommended for use in reciprocating compressors with cylinder lubrication systems.
Compressor Oil is especially suited for Compressor where manufacturer specifies a non-detergent, R&O Oil. It is also applicable where Single stage and Multistage reciprocating compressor and oil flooded screw compressor operating high temperatures up to 220 °C.
20L & 208L
Longer intervals between cleaning of valves, heat exchangers, and piping ensure lower maintenance costs.
Carbon and deposits formation reduces fire and explosion hazards.
Single oil lubricates cylinders and crankcase.
Suitable for both large and small compressors.
Reduced wear of rings, cylinder, bearings, and gears.
Reduced sludge formation in discharges lines.
Reduced blockage of coalescent.
Improved protection of valves and reduced wear of rings and cylinders.
| Properties | Units | Methods | ISO VG Grades 68 |
|---|---|---|---|
| Appearance | – | Visual | Clear Liquid |
| Kinematic Viscosity @40 °C | mm²/s | ASTM D445 | 68 |
| Kinematic Viscosity @100 °C | mm²/s | ASTM D445 | 9.8 |
| Viscosity Index | – | ASTM D2270 | 110 |
| Pour Point | °C | ASTM D97 | -27 |
| Flash Point | °C | ASTM D92 | 256 |
The typical characteristics mentioned represent mean values.
Atlas Compressor Oil 68 is unlikely to have any significant health or safety hazard when properly used in recommended application and follow good standards of personal hygiene.
Avoid prolong contact with skin. Use impermeable gloves while handling oil. After skin contact, wash with soap and water
