ATLAS Smart Cut is a Water-soluble cutting oil, a crucial component in metalworking processes. It combines with water for effective cooling, lubrication, and chip removal. Additives enhance its performance, ensuring extended tool life, improved surface finish, and reduced heat generation during machining. This versatile oil is essential for a wide range of metalworking applications.
20L & 208L
Forms stable emulsion.
Keep work piece and tool, cool and clean.
Antifoam and antirust.
Improves tool life and gives a better surface finish.
Resistance to bacterial growth.
SMART CUT is suitable for wide range of machining for low to medium alloy steels, aluminum, brass, copper and copper alloys.
SMART CUT is recommended in an oil-to-water ratio of 1:10 to 1:50 or as per application required. Generally richer emulsion is used for more difficult jobs.
| Properties | Units | Methods | Values |
|---|---|---|---|
| Appearance | – | – | Clear |
| Relative Density @15 °C | g/ml | ASTM 1298 | 0.867 |
| Kinematics Viscosity @ 40 °C | c.St | ASTM D445 | 28.5 |
| Flash Point | °C | ASTM D92 | 210 |
| Emulsion Stability Test | – | IP-263 | Pass |
| Corrosion of Cast Iron | – | IP-125 | Pass |
| Rust Prevention Characteristic | – | IP-287 | Pass |
| PH of 5 vol %, in water | pH | – | 9.1 |
The typical characteristics mentioned represent mean values
Atlas Smart Cut unlikely to have any significant health or safety hazard when properly used in recommended application and follow good standards of personal hygiene.
Avoid prolong contact with skin. Use impermeable gloves while handling oil. After skin contact, wash with soap and water
