Atlas Max Loom 50 formulated from mineral oils having good adhesiveness and film strength, inherent oxidation and thermal stability, besides excellent ability to separate from water, resistance to rusting and corrosion. They maintain thin film of oil under light and medium loads, protect machinery from excessive wear and provide economical lubrication.
Max Loom 50 is recommended for lubrication of looms and can be used in the lubrication of small open gears under light duty conditions where oil is applied intermittently by means of oil can.
Loomax is straight mineral lubricating oil formulated for all-loss lubrication system of looms and drives used in textile and jute mills.
10L & 208L
Good oxidation stability and ageing resistance
Excellent load carrying ability reduces wear on machinery.
Maintains its viscosity even at high operating temperatures.
Excellent corrosion protection for steel and non-ferrous metals
Oils specially treated to have good anti-rusting properties are available for use under difficult conditions.
| Properties | Units | Methods | Values |
|---|---|---|---|
| Appearance | – | Visual | Clear liquid |
| Density @15°C | Kg/L | ASTM 4052 | 0.871 |
| Kinematic Viscosity @40°C | mm²/s | ASTM D445 | 185 |
| Kinematic Viscosity @100°C | mm²/s | ASTM D445 | 18.9 |
| Viscosity Index | – | ASTM D2270 | 108 |
| Pour Point | °C | ASTM D97 | -12 |
| Flash Point | °C | ASTM D92 | 220 |
The typical characteristics mentioned represent mean values.
Atlas Loomax 50 unlikely to have any significant health or safety hazard when properly used in recommended application and follow good standards of personal hygiene.
Avoid prolong contact with skin. Use impermeable gloves while handling oil. After skin contact, wash with soap and water.
